HIKVISION DS-TCG406-E - Page 26

Steps
Note
The supported funcons vary with dierent models. The actual device prevails.
1.
Go to Live View → Real-Time Capture .
2.
Click Arming.
3.
Select an item from the list, and you can view the capture scene picture and recognized license
plate
informaon.
Figure 3-9 Real-Time Picture
4.
Oponal: You can also do the following operaons.
/
/
●
Level 1 Arming can only connect one client or web. The uploaded pictures will
not be stored in the storage card. The pictures in the storage card will be
uploaded to the level 1 arming.
●
Level 2 Arming can connect three clients or webs. The pictures will be
uploaded to the client/web, and stored in the storage card.
●
Disarming is to cancel the alarm status or real-me picture.
Click it to measure the license plate pixel. Click it again to disable the
measurement.
Click it to enable the ruler to measure the license plate.
Click it to enable manual capture.
Intelligent Entrance ANPR Camera User Manual
18