HIKVISION DS-TCG406-E - 4.1.2 Control Barrier Gate Operations

Figure 4-2 Control Barrier Gate
2.
Set Barrier Gate parameters.
Control Mode
●
Select By Camera in single camera scene (no control
soware) and allowlist scene in which
the camera controls the barrier gate in advance according to the set passing rules in
Vehicle
Informaon Management.
●
Select By Plaorm in the scene in which the entry permissions are controlled by the
soware.
●
Select By Mixed, and the plaorm control and camera control are eecve simultaneously.
It is applicable to the scene in which
dierent vehicle passing permissions are managed by
soware and camera. E.g., the soware controls the passing of blocklist vehicles and
temporary vehicles, and the camera controls the passing of allowlist vehicles and controls
the barrier gate in advance for allowlist vehicles.
Keep Barrier Open for Following Vehicle
Aer you enable this funcon, the barrier gate keeps open when the device detects following
vehicles are passing. The barrier gate will close aer the following vehicles pass.
Lock Barrier Gate for Large-Sized Vehicle
Enable the funcon and set Barrier Gate Rising Time. If a large-sized vehicle is passing, the
barrier gate will be locked during the set
me.
Intelligent Entrance ANPR Camera User Manual
22