Hillrom Affinity 4 User Manual

Symbols
4 Affinity® 4 Birthing Bed Instructions for Use (USR025 REV 13)
PRODUCT SYMBOLS
These symbols are on the product and may or may not be on your model of the Affinity® 4 Birthing Bed:
Symbol Description Symbol Description
All Affinity® 4 Models
Catalog number Serial number
Manufacturer Date of manufacture
Warning: Do Not Use
with Oxygen Tents—
Must consult
accompanying
documentation—
indicates the use of
oxygen administering
equipment of the nasal,
mask, or ventilator type
only or oxygen tents
that can be contained
inside the siderails.
Can be green or blue.
Conforms to European
requirements for class I
medical devices in
accordance with:
• Directive 93/42/EEC
until May 25, 2021
•Regulation (EU)
2017/745
regulation by May
26, 2021
Type B applied part
according to IEC 60601-
1 (UL 60601-1).
Medical Device
Bed Up/Bed Down
control.
Do not step—do not
step on the Stow and
Go® Foot Section.
Blue and black is for B
through D model beds.
Red and black is for E
model and newer beds.
Foot and head sections
Up/Down controls.
Warning—Do not step
(located on the base
frame).
Blue and black is for A
through D model beds.
Red and black is for E
model and newer beds.
Battery charge status
(refer to the section
titled “Battery Backup”
on page 18 for battery
status information).
Shows that you should
not hang power cords
on the Line Managers.

Hillrom Affinity 4 Specifications

General

Brand	Hillrom
Model	Affinity 4
Category	Medical Equipment
Language	English