EasyManua.ls Logo

Hillrom Affinity 4 - Laundry Guidelines; Care of Wood Components; Mattress Care and Draping

Hillrom Affinity 4
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and Disinfecting
Affinity® 4 Birthing Bed Instructions for Use (USR025 REV 13) 41
Laundry Guidelines
Laundry can be used as a pre-cleaning step for the Affinity® 4 head and foot slipcovers. Launder the
slipcovers, then follow the Cleaning and Disinfection instructions. Machine wash the slipcovers as
follows:
1. Remove the head and foot slipcovers from the mattress.
2. Machine wash the slipcovers per facility protocol.
3. Rinse the slipcovers thoroughly in clean water.
4. Use the lowest temperature setting of the dryer to dry the slipcovers. Do not use high
temperatures.
5. Follow the Cleaning and Disinfecting instructions. See “Cleaning and Disinfecting” on page 38.
CARE OF WOOD COMPONENTS
Wood is selected for use on beds because of its beauty and warmth. All Hill-Rom® wood products are
treated with a resin-based sealer and finish that provide resistance to abrasion, staining, fluids, and fire.
Many disinfectant/cleansers have a “softening” effect on any painted or finished surface if used in high
concentrations. Diluted ammonia, mild detergents, and diluted bleach solutions may be used. Clean by
wiping a soft dampened cloth over the surface, followed by wiping with a dry cloth. At no time should a
wet cloth be allowed to lay on the surface. Any liquid spilled on the surface should be wiped up
immediately. Any liquid allowed to lay on the surface unattended may damage the finish. For protection
of the finish we recommend using a liquid-type furniture polish. Polish about once a month, and wipe
off any excess with a soft dry cloth. Have any nicks or scrapes repaired to prevent water damage.
MATT RESS CARE AND DRAPING
Correct draping technique is essential in preserving the life of the mattress. Drapes must be fluid
repellent. The Hill-Rom labor and delivery drape effectively covers the lower three quarters of the
bedding throughout labor. Additional pads or towels placed under the patient will help prevent fluid
from reaching the edges of the drape. This safeguard keeps the sheets clean and dry while preventing
fluid exposure to the mattress.
NOTES
Standard OB packs and paper drapes will not keep the sheets dry.
Repeated soaking of mattress materials will accelerate wear and eventually destroy mattress seals,
causing fluids to leak into the cushions.
Hill-Rom slipcovers are recommended to help extend the life of the mattress.
Mattress damage caused by improper draping and cleaning procedures is not covered by warranty.
Sheets must always be placed over the mattress before the bed is used by a patient.

Table of Contents

Related product manuals