Hillrom Affinity 4 - Mattress Models; Non-Air Mattress; Wood Headboards; Patient Positioning-Labor and Birth

Patient Positioning—Labor and Birth
22 Affinity® 4 Birthing Bed Instructions for Use (USR025 REV 13)
MATT RESS MODELS
The bed is available in two options: the V-Cut or Straight-Cut.
Non-Air Mattress
A pressure redistribution foam mattress is available.
WOOD HEADBOARDS
The wood headboards include built-in handles which aid in steering
control and increase mobility. The headboard assembly is removable.
Beds with the push handle option will not have handles on the
headboard.
To remove—grasp the hand holds firmly, and lift up.
To install—align the headboard sockets with the posts on the bed
frame, and lower the headboard until it rest on the bed frame.
PATIENT POSITIONING—LABOR AND BIRTH
NOTE:
The Labor and Delivery Drape should be placed over the bottom sheet before the patient gets into the
bed.
To allow the patient to participate, show her how to operate the controls.
V-Cut
Straight-Cut