Hillrom Affinity 4 - E Model and Newer

Symbols
Affinity® 4 Birthing Bed Instructions for Use (USR025 REV 13) 7
E Model and Newer
According to IEC 60529,
rating for protection
against fluid ingress
and identified as
equipment that is
protected against
vertically falling water
when tilted up to 15°.
Total bed weight,
including the rated safe
working load (SWL), is
470 kg (1036 lb); and
where the rated SWL for
the bed-frame includes
maximum patient
weight. This label is
only applicable to the
P3700E Serial Numbers
after those that begin
with S361AA (and in
accordance with the
standards shown in the
Classification and
Standards table on
page 48).
Note: Affinity® 4 bed
weight, excluding rated
SWL, is 244 kg (536 lb)
minimum.
Certified by
Underwriters
Laboratories, Inc.
(P3700E Serial Numbers
that begin with
M171AA and up to
Serial Numbers
beginning with
O218AA; as being in
accordance with that
which is shown in the
Classification and
Standards table (see
page 48)
WARNING: Consult
accompanying
documents. Yellow and
black.
Certified by
Underwriters
Laboratories, LLC
(P3700E Serial Numbers
that begin with O219AA
and higher); as being in
accordance with that
which is shown in the
Classification and
Standards table (see
page 48)
CAUTION: Consult
accompanying
documents. White and
black.
Symbol Description Symbol Description