Specifications
92 Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)
Surface and Air Supply Unit Specifications
Environmental Conditions for Transport and Storage
We recommend that you fully charge the batteries before the bed is subjected to cold temperature
situations. This will help the bed to acclimate more quickly when you prepare it for use. It may take up to
12 hours to fully charge the batteries.
Environmental Conditions for Use
Feature Dimension
Air supply unit model number P7810
Air supply unit height 12.1" (30.7 cm)
Air supply unit width 14.5" (36.8 cm)
Air supply unit depth 6.0" (15.2 cm)
Air supply unit weight 11 kg (24 lb)
Therapy surface model number P642
Foam surface model number P641
Surface height—inflated 8" (20 cm), foam surface
8.5" (21.5 cm), therapy surface
Surface width 40" to 50" (102 cm to 127 cm)
Surface length—inflated 80" to 88" (203 cm to 224 cm)
Surface weight 17 kg (38 lb), foam surface
23.6 kg (52 lb), therapy surface
Latex content User accessible parts (surface, pumps, and
accessories) are not made with natural rubber latex
Operating weight range 113 kg to 454 kg (250 lb to 1000 lb)
Operating height range 50" to 78" (127 cm to 198 cm)
Air supply unit—range of pressures shown 0 to 99 mmHg
Accuracy of shown pressures +/- 2 mmHg
Condition Range
Temperature (frame and surface only) -20°F to 140°F (-29°C to 60°C)
Temperature (air supply unit only) -4°F to 158°F (-20°C to 70°C)
Relative humidity 15% to 90% non-condensing
Pressure 50 kPa to 106 kPa
Condition Range
Temperature (frame only) 50°F to 104°F (10°C to 40°C) ambient
temperature
Temperature (surface and air supply unit
only)
50°F to 94°F (10°C to 35°C) ambient
temperature
Relative humidity range 20% to 85% non-condensing
Atmospheric pressure 70 kPa to 106 kPa
Altitude 3000 m to -330 m (9842.5 ft to -1082.7 ft)
To Next Page
Loading...
