1
2
3
4
5
6
7
8
9
Measurement Preparations
3.8 Turning the Power On/Off
43
Screen Display at Power On
Before turning off the power
If an error occurs during self-testing, the instrument may be dam-
aged. Contact your dealer or Hioki representative.
Data in internal memory is erased whenever the instrument is
turned off. Therefore, to preserve recorded data, be sure to save
it to a PC Card.
❖ Saving, Loading and Deleting(page 53)
❖ Saving a Settings File to a PC Card (from [SETTING]/[ANALYZ-
ING] modes)(page 112)
❖ Automatically Saving Measurement Data to a PC Card(page 113)
❖ Storing data on a PC card after measurement (during [ANALYZ-
ING])(page 114)
The initial screen appears when power is turned on and during
self-testing.
When the self-test finishes,
[SYSTEM] - DF1 [WIRING] screen
appears.
HIOKI 3196 POWER QUALITY
ANALYZER
Ver 1.40
MAIN Boot Complete!!!
SUB Boot Complete!!!
AMP Boot Complete!!!
DRAM Check!!! Pass!
VRAM Check!!! Pass! !!!
INIT RTC
INIT PC-CARD
INIT WinSystem
INIT AMP
Model Information
Version
Internal component test results
Internal memory test results
Initialization information
To Next Page
Loading...
