1
2
3
4
5
6
7
8
9
11
Measurement Method
6.5 Detecting Transients and Waveform Distortion
93
9.
To determine if an event occurs
MONITOR
"0" is displayed when no event has occurred.
If an event occurs, the color changes to red and the count
is incremented.
Starts and stops in recording are classed as events. Note
that when recording starts, "Other (Ext)" changes to red
and the value becomes "1".
10.
Ending the recording interval
Use the same method as when measuring power fluctuation. (page 68)
To Next Page
Loading...
