102
Preparing to Use an Interface (Connection and Settings)
Using the GP-IBinterface
Preparation process
(1) Set the instrument’s communications conditions.
(2) ConnecttheGP-IBcable.
(1) Set the communications conditions.
(Measurement screen) MENU > I/F
1
2
3
1
2
3
Set the address.
˄ Increases the address by 1.
˅ Decreases the address by 1.
CLR Sets the address to 0.
CANCEL Cancels the setting and returns
to the previous screen.
(Default setting: 1, valid setting range: 1 to 30)
4
Select the message terminator.
Default setting: LF
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
