103
Preparing to Use an Interface (Connection and Settings)
(2) Connect the GP-IBcable.
Before connecting the GP-IB cable, read “Before connecting the communication cables (USB, LAN,
RS-232C, GP-IB)” (p. 10) and “Before connecting to the RS-232C or GP-IB connectors” (p. 11)
carefully.
Connect the GP-IB connection cable to the instrument’s GP-IB connector. When connecting the
cable, be sure to tighten the fastening screws.
GP-IB cable
Computer or other device’s
GP-IB interface
Recommended cable:
9151-02 GP-IB Connector Cable (2 m)
8
Preparing to Use USB, RS-232C, GP-IB, and LAN Control
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
