Hioki DM7275 Series - Page 106

104
Preparing to Use an Interface (Connection and Settings)
UsingtheLANinterface
The instrument ships standard with an 100Base-TX Ethernet interface. You can control the
instrument with a computer or other device by using a 10Base-T or 100Base-TX compatible LAN
cable (up to 100 m) to connect the instrument to a network.
Connecting the instrument and
computers to a network
Connecting the instrument to a single
computer
Hub
Hub
In addition, you can control the instrument using communications commands by creating a program
and having it connect to the communications command port using TCP. (See the Communication
Command Instruction Manual on the included application disc.)
Preparation process
(1) Set the instrument’s communications conditions. (p. 105)
(2) ConnectaLANcabletotheinstrument.(p. 108)
w ww . . co m
information@itm.com1.800.561.8187