Hioki DM7275 Series - Page 109

107
Preparing to Use an Interface (Connection and Settings)
(Measurement screen) MENU > I/F
1 2
3 4
1
2
3
4
SettheIPaddress,subnetmask,
gateway,andcommunicationscommand
port.
(Example screen: IP address setting)
˄ Increases the address by 1.
˅ Decreases the address by 1.
CLR Sets the address to 0.
CANCEL Cancels the setting and returns
to the previous screen.
(Default settings: IP address [0.0.0.0],
subnet mask [255.255.255.0],
default gateway [0.0.0.0],
communications command port [23])
8
Preparing to Use USB, RS-232C, GP-IB, and LAN Control
w ww . . co m
information@itm.com1.800.561.8187