108
Preparing to Use an Interface (Connection and Settings)
(2) Connect the LANcable.
Before connecting the LAN cable, read “Before connecting the communication cables (USB, LAN,
RS-232C, GP-IB)” (p. 10) carefully.
Connect the LAN cable to the instrument’s LAN connector.
LAN cable
GreenLED
On: Link
Flashing: Communicating
OrangeLED
Off: 10Base-TX
On: 100Base-TX
Computer or hub
Instrument’s LAN
connector
Recommended cables
9642 LAN Cable (optional) or a 100Base-TX or 10Base-T compatible LAN cable (up to 100 m,
straight or crossover cable)
If the green LED fails to light up after connecting a LAN cable, the instrument or connected
device may be malfunctioning, or the LAN cable may have a break in it.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
