Hirschmann qSCALE i2 - Page 121

Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 121/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
Error
Code
Description
Cause
Notice/Solution
114D
broken wire
Sensor Error: IOBy-
pA2B2
Faulty A2B override
switch or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
124D
circuit ground
134D
circuit battery
144D
module error
154D
output deactivated
164D
error +UB
174D
data error / CAN error
184D
timeout / CAN timeout
194D
safety error
1A4D
parameter error
1B4D
unspecified error
1C4D
missing adjustment
114E
broken wire
Sensor Error:
IOBypTW1
Faulty Rope-end over-
ride switch or input
module is defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
124E
circuit ground
134E
circuit battery
144E
module error
154E
output deactivated
164E
error +UB
174E
data error / CAN error
184E
timeout / CAN timeout
194E
safety error
1A4E
parameter error
1B4E
unspecified error
1C4E
missing adjustment
114F
broken wire
Sensor Error:
IOBypTW2
Faulty Rope-end over-
ride switch or input
module is defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
124F
circuit ground
134F
circuit battery
144F
module error
154F
output deactivated
164F
error +UB
174F
data error / CAN error
184F
timeout / CAN timeout
194F
safety error
1A4F
parameter error
1B4F
unspecified error
1C4F
missing adjustment