Hirschmann qSCALE i2 - Page 125

Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 125/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
Error
Code
Description
Cause
Notice/Solution
1159
broken wire
Sensor Error:
IOTeleSw2
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
1259
circuit ground
1359
circuit battery
1459
module error
1559
output deactivated
1659
error +UB
1759
data error / CAN error
1859
timeout / CAN timeout
1959
safety error
1A59
parameter error
1B59
unspecified error
1C59
missing adjustment
115A
broken wire
Sensor Error:
IOTeleSw3
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
125A
circuit ground
135A
circuit battery
145A
module error
155A
output deactivated
165A
error +UB
175A
data error / CAN error
185A
timeout / CAN timeout
195A
safety error
1A5A
parameter error
1B5A
unspecified error
1C5A
missing adjustment
115B
broken wire
Sensor Error:
IOTeleSw4
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
125B
circuit ground
135B
circuit battery
145B
module error
155B
output deactivated
165B
error +UB
175B
data error / CAN error
185B
timeout / CAN timeout
195B
safety error
1A5B
parameter error
1B5B
unspecified error
1C5B
missing adjustment