Hirschmann qSCALE i2 - Page 126

Appendix
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 126/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
Error
Code
Description
Cause
Notice/Solution
115C
broken wire
Sensor Error:
IOTeleSw5
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
125C
circuit ground
135C
circuit battery
145C
module error
155C
output deactivated
165C
error +UB
175C
data error / CAN error
185C
timeout / CAN timeout
195C
safety error
1A5C
parameter error
1B5C
unspecified error
1C5C
missing adjustment
115D
broken wire
Sensor Error:
IOTeleSw6
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
125D
circuit ground
135D
circuit battery
145D
module error
155D
output deactivated
165D
error +UB
175D
data error / CAN error
185D
timeout / CAN timeout
195D
safety error
1A5D
parameter error
1B5D
unspecified error
1C5D
missing adjustment
115E
broken wire
Sensor Error:
IOTeleSw7
Tele position initialization
failure or input module is
defective
Check the CAN connections and wiring, the
sensor calibration, and the CAN configura-
tion. Invalid sensor swap
125E
circuit ground
135E
circuit battery
145E
module error
155E
output deactivated
165E
error +UB
175E
data error / CAN error
185E
timeout / CAN timeout
195E
safety error
1A5E
parameter error
1B5E
unspecified error
1C5E
missing adjustment