Hirschmann qSCALE i2 - Page 19

Troubleshooting
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 19/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
3.1.2.1.2 Digital Output Screen
Digital Output Screen shows all of the configured digital outputs for the system (if there are no digital
outputs then this screen will not exist). These outputs are wired from the DIO Box; refer to your crane
system wiring diagram for details. Use the rotary knob to scroll between all available outputs.




MAIN
WORKING
SCREEN
OP-MODE
CONFIRM
INFORMATION
SELECTION
SENSOR
INFORMATION
DIGITAL
OUTPUTS
Additional Information
The following information can be found on this screen:
 Value False = Low, True = High
 Fault Indication whether an error has occurred calculating this value
 State Current Status of value
 Substitute Not Configurable
 Debounce Time According to Project File I/O configuration
 Error Base Base error class and priority of the sensor when an error occurs
 Raw Source Available in Additional Information
Function Keys