WIKA Mobile Control LP
1540 Orchard Drive
Chambersburg, PA 17201
qSCALE maestro (PLC v01.00.00) Service Manual / Issue E (HMI v1.0.0) 04/2018 / rbm.
Service : (717) 217-2250
Parts / Sales : (717) 217-2269
www.wika-mc.com
7
/76
HIRSCHMANN MCS
1 Safety Instructions
WARNING
Imminent threat of personal injury and damage to property due to incorrect sys-
tem settings!
The correct adjustment of the RCL to the current set-up status is essential for the
correct function of the system and of the machine.
The RCL can only operate correctly if all settings are entered correctly according
to the current set-up status during the SETUP procedure.
The settings can only be carried out by operators who are completely familiar with
the operation and functions of the machine and the RCL.
The correctness of these settings must be guaranteed before starting the machine
operations!
IMPORTANT
Connection to the wrong power supply will cause damage to the device.
The device may only be connected to a DC voltage source of 10 V to 30 V!
To Next Page
Loading...
Need help?
General
