Hitachi IJ PH - Front Panel and LCD Assembly Replacement

3-9
3.2.5 Front panel assembly Replacement Procedure
1 Turn off the power supply.
2 Remove the fixing screws(4 pieces) and the harness from the clamps
(2 positions) of the CCB cover and remove the CCB cover.
3 Remove the fixing screw of the SUS ball chain and the fixing screw
of the clamp and then remove the harness from the clamps (2 positions)
and remove the connector from CN3.
Clamps
(2 positions)
Fixing screws
(4 pieces)
CCB Cover
Harness
Fixing screw
SUS ball chain
Connector (CN3)
Fixing screw
Clamp
Clamps
(2 positions)