● Setting the User Environment 4-5
Setup item Description Default
Method to
apply print data
● Set the action when print contents are changed
and determined during printing.
● When character is input to an item in which all
print contents are invalid characters, action of
method 1 will be applied even if method 2 is
selected.
● When print content in an item including calendar
character, count character or barcode item is
changed, action of method 1 will be applied even
if method 2 is selected.
Method 1
Character size
menu
● Specifies the character size to be employed.
● The following sizes can be selected.
Character
size 1:5×8
Character
size 2:7×10
Excitation
V-ref. warning
● When the difference between the current ambient
temperature and the standard one (the ambient
temperature when the excitation V-ref. setting is
updated) exceeds a certain level, the alarm "Exci-
tation V-ref. Review" occurs. This enables/dis-
ables the function.
Depends on
the ink type.
Method 1
When print contents are changed
and determined during printing,
"Print data changeover in progress
M" error will occur.
Method 2
When print contents are changed
and determined during printing,
changed contents will be reflected
in printing about one second later.
("Print data changeover in progress
M" error does not occur.)
Character size 1 5×8, 5×7
Character size 2 7×10, 9×8, 9×7
To Next Page
Loading...
