¿ Removing bottom service cover and rear cover
1 Remove five (5) screws which fix the bottom service cover. Pull and remove the bottom service cover.
2 Remove the upper cover following Removing upper cover, see on page 403.
3 Remove seven (7) screws which fix the rear cover (eight (8) screws for two-fan models; the inlet grill is fixed with four
(4)). Pull backward and remove the rear cover.
1. Outlet grille.
2. Rear cover.
3. Bottom service cover.
1. Outdoor air thermistor attachment.
2. Inlet grille.
3. Rear cover.
¿ Removing outdoor fan motor
1 Remove the service cover following Removing service cover, see on page 402.
2 Remove the outlet grille following Remove outlet grille, see on page 403.
3 Remove the upper cover following Removing upper cover, see on page 403.
10 Servicing
404
SMGB0060 rev. 1- 12/2010
To Next Page
Loading...
