Hitachi RAS-3HVRNS - Page 42

One flow guide installation
1 Air discharge grille
2 Air flow
3 Air flow guide
4 Outdoor unit
5 M5 fixing screw x4 (Accessories)
Service space (In case of upward air discharge)
• In case of right and left sides air discharge, enough space for
air discharge is required.
• The downward air discharge is also available. In such case,
install the base under the unit to secure enough space for air
discharge.
• In case of serial units installation, air discharge should be
upward.
1 Min. 200 mm
2 Outdoor unit
3 Air flow guide
4 Passage side
¿ Wind guard
Specifications
Model
WSP-335A
Quantity 1per unit
1
1
2
2
2
2
3
1 Mounting dimension
2 Air flow
3 3 4xØ7
Material
Galvanized sheet metal +
baked painting
Color Gray (1.0Y8.5/0.5)
Weight 5.5 kg
Accessories
Fixing screw
x 4 [M5 (SUS) x 12]
Installation manual
Installation
restriction
“Guard net”, “Air flow guide” or “Snow protection
hood” is not available to install with Wind guard
4
1
3
2
5
1
2
3
4
2 Unit Installation
34
SMGB0060 rev. 1- 12/2010