2-5
SERVICING
(2.1 Outdoor Unit)
NOTES:
1. Make the cord outlet of the motor directing downward when mounting the motor.
2. Firmly fix the motor wires onto the motor clamp with the plastic tie, not to touch the propeller fans.
3. Mounting Propeller Fan
Put and push the propeller fan by identifying the mark with the cut part of the motor shaft.
Firmly fix the propeller fan twice with a tightening torque from 14.55 N
m to 15.0 N
m after the head of
the fan shaft comes up.
4. Connect the motor wires to the electrical connecting part at the upper part of the electrical box.
(3) Removing Wires
(a) Remove two (2) screws fixing the electrical box cover and remove the electrical box cover.
(b) Disconnect the connectors for the motors in the electrical box.
(c) Remove the motors by removing four (4) fixing bolts for the motors.
TURN OFF all power source switches.
Phillips Screwdriver, Adjustable
Wrench, Spanner, Cutter, Stick
Tool
Bolt
Motor
Motor Shaft
Motor Clamp
Electrical Box
Connector
To Next Page
Loading...
Need help?
General
