Hitachi RPI-1.0FSG1 - Removing Drain Pump

2-48
SERVICING
(2.2 In-the-Ceiling Type)
Phillips Screwdriver, SpannerTool
2.2.7 Removing Drain Pump
In case of the units with the drain pump (RPI-0.8 to 1.5FSG1), the drain pump is fixed on the service
cover.
Remove the fixing screws and remove the drain pump.
TURN OFF all power source switches.
Indoor Unit
Drain Connection
Service Cover
A
A
View from
Drain Pan
Drain Pump