Hitachi RPI-1.0FSG1 - Remote Control Switch, PC-P1 H and PC-2 H2; Name of Part

4-35
OPTIONAL FUNCTION
(4.4 Remote Control Switch)
4.4 Remote Control Switch, PC-P1H and PC-2H2
4.4.1 Name of Part
Remote Control Switch (PC-P1H and PC-2H2: Option)
TEMP.
RUN / STOP
MODE
FAN SPEED
VENTI
RESET
CHECK
LOUVER
ON/OFF TIMER
TIME
NO FUNCTION
FAN
COOL
HEAT
DRY
AUTO
HIGH
MED
LOW
A/C
VENT
+
SWING
DEFROST
CENTRAL
H.STRG
SERVICE
ON/OFF TIMER
SET TEMP.
RN
HR
FILTER
T. RUN
ABNML
CHECK
ADDS
UNIT
LOUVER
Liquid Crystal Display (L.C.D) Section
Swing Louver Indicator
"DEFROST" Indicator
CENTRAL (Central Control) Indicator
Fan Speed Indicator
Ventilation Indicator
Operation Mode Indicator
Automatic Cooling / Heating
Operation Indicator
Run indicator (Red Lump)
Operation Switch Section
*Run / Stop Switch
MODE (Operation Mode
Selection) Switch
*FAN SPEED (Fan Speed
Selection) Switch
" "(Up & Down Panel Operation) Switch
(This function is not available.)
LOUVER (Swing Louver Operation) Switch
*VENTI (Ventilator Operation) Switch
*TIME (Time Setting) Switch
*ON / OFF TIMER Switch
CHECK Switch
*RESET (Filter Reset) Switch
TEMP (Temperature Setting)
Switch
ABNML (Alarm) Indicator
"FILTER" Indicator
ON / OFF Timer (Timer
Operation) Indicator
SET TEMP (Set Temperature)
Indicator
Alarm Code Indicator
"NO FUNCTION" Indicator
*Available for Total Heat
Exchanger Operation