2-60
SERVICING
(2.4 4-Way Cassette Type)
2.4.8 Removing Drain Pan
(1) Remove the optional air panel according to the item 2.4.4 “Removing Optional Air Panel”.
(2) Remove the electrical box cover according to the item 2.4.3 “Removing Electrical Box Cover”.
Disconnect the connectors of the air outlet thermistor, piping thermistors (2), electronic expansion
valve, drain pump, float switch and fan motor.
(3) Remove the fan runner and fan motor according to the item 2.4.5 “Removing Fan Runner and Fan
Motor”.
(4) Drain the drain water by pulling the rubber plug.
Check clogging at the drain hole.
(Do not use a cutter when removing the rubber plug. If used, the rubber plug will be damaged.)
(5) Remove four (4) bolts for fixing the drain pan and remove the drain pan.
TURN OFF all power source switches.
Phillips ScrewdriverTool
Rubber Plug
Drain Pan
Bolt for
Fixing Drain Pan
To Next Page
Loading...
