Hitachi RPI-1.0FSG1 - Removing Discharge Air Grille

2-105
SERVICING
(2.9 Ceiling Type)
Phillips ScrewdriverTool
TURN OFF all power source switches.
Phillips ScrewdriverTool
(3) Remove the screw supporting the bearing at the left side, pull out the discharge air grille including the
bearing, and pull out the discharge air grille from the right side of the bearing.
2.9.3 Removing Discharge Air Grille
(1) Remove the side covers according to the item 2.9.2 “Removing Side Cover”.
(2) Remove the screw connecting the AS motor assembly and the discharge air grille, and remove the
stopper.
Screw
Stopper
Connector for AS Motor
Discharge
Air Grille
Screw
Bearing
2
1