Hitachi RPI-1.0FSG1 - Floor Type; Removing Air Intake Grille; Removing Air Filter

2-94
SERVICING
(2.7 Floor Type)
2.7.1 Removing Air Intake Grille
(1) Loosen the screws for fixing plate at the right side of each air intake grille, and move the fixing plates.
(2) By pushing the knob at both sides of the air intake grille towards the arrow mark direction, the grille
can be opened with an angle 30°.
(3) Remove it from the hinged part.
2.7.2 Removing Air Filter
(1) The air filter is located at the inner side of the air intake grille. Remove all the air intake grilles.
(2) Remove the air filter by pulling the knob of the air filter.
2.7 Floor Type
TURN OFF all power source switches.
Knob