2-96
SERVICING
(2.7 Floor Type)
TURN OFF all power source switches.
2.7.5 Removing Fan Motor
(1) Remove the air intake grille according to the item 2.7.1 “Removing Air Intake Grille”.
(2) Remove the air filter according to the item 2.7.2 “Removing Air filter”.
(3) Remove the front cover according to the item 2.7.4 “Removing Front Cover”.
(4) Remove the mounting plate for the fan motor after removing four fixing screws.
(5) Disconnect the wiring connector for the fan motor. Remove the wiring assembly and connector.
Phillips ScrewdriverTool
Screws
Connector
Wiring Assembly
To Next Page
Loading...
