2-46
SERVICING
(2.2 In-the-Ceiling Type)
2.2.4 Removing Thermistor for Liquid Piping and Gas Piping
(1) Remove eight (8) M4 screws fixing the service cover and remove the service cover.
Phillips ScrewdriverTool
TURN OFF all power source switches.
(2) Remove the cork tape, pipe insulations and the thermistor holder, the thermistors for pipes can be
removed.
Phillips ScrewdriverTool
Screws (M4 x 8)
Service Cover
Expansion Valve
Thermistor for
Liquid Piping
Thermistor for
Gas Piping
To Next Page
Loading...
