2-21
SERVICING
(2.1 Outdoor Unit)
(7) Remove Td thermistor on the top of compressor.
Td thermistor is inside of the compressor cover.
NOTE:
The thermostat fixer, holder, thermostat holder and holder for Td thermistor are used again when
reassembling.
Keep them in a box so that the parts are
stored correctly.
Adjustable Wrench or Spanner,
Phillips Screwdriver
Tool
TURN OFF all power source switches.
(8) Remove the 2 screws fixing the compressor base.
(The compressor base is fixed by 2 screws at front of the unit.)
Adjustable Wrench or Spanner,
Phillips Screwdriver
Tool
Remove fixing screws for
the compressor base.
Thermostat
Holder
Holder
Td
Thermistor
Thermostat
Fixer
To Next Page
Loading...
