Hitachi UTOPIA RAS-4HVRP2E - Assembly of Snow Protection Hood

2 Optional parts and installation
Optional parts and installation for RAS-3HVRC2
SMGB0136 rev.0 - 07/2021
33
2
2.1.3.4 Assembly of snow protection hood
A. Rear side
B. Left side
C Front side
1 Fixing screw
2 Air inlet hood
3 Wire rope (optional for over turning protection)
4 Air discharge hood
5 Outdoor unit
a > Maximum snowfall height
A B C
1
3
1
2
4
2
1
5
3
a
1
3
1
2
4
2
1
5
3
a
? NOTE
The holes locations marked with a mark shall be made by using self screw (M4x13) and later shall be used SUS Screw for xing protec-
tion hood.