User manual C4 – C6
17
3. GENERAL INSTRUCTIONS FOR USE
The compact crane is a machine intended for lifting loads. It is only permitted to use the compact
crane for the intended uses. Additionally, you are not permitted to change movement speeds on
your own. It is also absolutely forbidden to exceed the maximum working load (see sections 9.1 and
9.2), and it is forbidden to bypass sensors. If changes are desired, you must contact the
manufacturer.
Before the machine is put in use the user must be sufficiently familiar with this user manual. All the
instructions and safety warnings in this user manual must be followed. Any use other than the
permitted use may result in danger to users and bystanders. Moreover, the machine may be
damaged. It is not permitted to use the machine in a way other than prescribed without express
written permission from Hoeflon International B.V.
Every employee must be familiar with all the instructions in this user manual. Failure to heed this
requirement is considered to be negligence.
To Next Page
Loading...