HOEFLON C4 - Lubricant Specifications; Boom Extension and Retraction Chains

User manual C4 – C6
72
7.5. Lubricant specifications
The diesel fuel used in the Yanmar engine must meet the following specifications.
 The cetane number must be 45 or higher.
 Use clean fuel.
 The diesel may not be more than 7% bio diesel.
Diesel fuel specifications
Location
ASTM D975
No. 1D S15
No. 2D S15
USA
EN 590:96
European Union
ISO 8217 DMX
International
BS 2869-A1 or A2
United Kingdom
JIS K2204 Grade No.2
Japan
KSM-2610
Korea
GB252
China
7.5.1. Boom extension and retraction chains
 Do not repair chains or insert links; if deficient, completely replace.
 If there are two extension or retraction chains, replace both, along with the connections, at the
same time.
 If the chains are soiled to the point that lubrication no longer helps, clean with petroleum ether
or diesel. Do not clean with acidic agents or a high pressure hose. These can damage the chains.
 Check the chain regularly for lubrication, rust, breaks in the pins/plates and wear and tear.
 Lubricate the chain every 100 hours (see maintenance schedule).
Manufact
urer:
Engine oil
Coolant
Hydraulic oil
End
reductors
Lubricat
ion
points
Chains
Sliding sections
Yanmar
(diesel)
Honda (petrol)
Universal
Bio
Lubricat
ing
grease
Spray
Q8
Q8 Formula
Advanced
SAE 10W-40
Formula V Long
Life 5W-30
Q8 Antifreeze
Long Life G12
Heller 32
Q8
Holbein
HP SE Bio
46
T 55
EP 2
Industrial
chain spray
EP2
PTFE
Total
Total Quartz
7000 Diesel
SAE 10W-40
Quartz Ineo Long
life 5W-30
Auto Supra
Equavis AF 32
/ ZS 46
BioHydran
TMP 32
EP-B 80W90
EP 2
Industrial
chain spray
EP2
PTFE
Shell
Shell Helix
Plus 10W-40
Shell Helix Ultra
AV-L 5W-30
G12
Shell Tellus
S2/S3
Shell
Naturelle
HF-E 32
Spirax S3 AX
80W-90
EP 2
Industrial
chain spray
EP2
PTFE
Kroon oil
Emperol
10W-40
Helar SP 5W-30
LL-03
Coolant SP 12
Perlus ZF 46
Perlus
Biosynth
46
Gearlube GL-
5 80W-90
EP 2
Industrial
chain spray
EP2
PTFE