User manual C4 – C6
26
6. WORKING WITH THE COMPACT CRANE
Every employee must observe the following rules/warnings while working with the compact crane.
Never enter the working area; this can have serious
consequences.
Do not let unauthorised persons enter the working
area of the compact crane.
It is prohibited to use the compact crane in an
explosion-hazardous area!
The user is responsible for safe operation of the
crane, the selection of appropriate accessories (based
on intended use, capacity, validity of inspection
stickers and visual inspection) and the personal safety
of the operator and people in the vicinity.
Outriggers may only be used on a suitable surface;
this means it must be adequately horizontal and have
sufficient load bearing capacity.
Work safely at all times, taking into account the crane,
surroundings, ground and load. Do not begin working
if there is a plausible risk of a dangerous situation
developing before appropriate measures have been
taken.
Operate the compact crane carefully; to prevent jolts
while driving, never release the levers suddenly. May
only be operated by authorised persons!
When the bypass is activated in the electrical cabinet
(figure 30 no. 6), sensors are bypassed. It is
prohibited to bypass the winch sensor. Use of the
bypass is entirely at your own risk.
Always perform the daily inspection first!
To Next Page
Loading...