User manual C4 – C6
27
Always ensure that no hazardous situation can
develop!
Ensure that the compact crane working area is tidy
and cordoned off
Use an extension cable with a diameter of at least 2.5
mm
2
and measuring no more than 25 m in length.
Never use the 110% button to increase the crane’s
outreach or to continue winching.
Do not use the compact crane until precautions have
been considered and taken to safeguard the user, the
machine, the load, the surroundings and the ground.
Ensure proper extraction of the exhaust gases when
used in enclosed areas.
When it is necessary to perform other related work,
switch off the control to prevent unintentional
movements.
Never leave the control unattended, unless the
ignition key is removed.
Never place loose parts on moving components of the
compact crane.
The directions of movement of the remote control with
respect to the compact crane match best if you are
behind the compact crane.
Use the toolbox only for crane parts and the tools
necessary for working with the compact crane (if
present).
To Next Page
Loading...