HOEFLON C4 - Maintenance Work

User manual C4 – C6
69
7.2. Maintenance work
The risk of accidents with machines is generally greater during maintenance, cleaning and service.
Have your dealer perform the maintenance work on the compact crane. In the Netherlands you can
choose to enter a maintenance contract with Hoeflon International B.V. The maintenance intervals
and work required are shown in the lubrication chart and maintenance schedule.
Weekly maintenance
 See maintenance chart.
 Grease the compact crane in accordance with the lubrication chart.
 Clean the compact crane with water and a mild cleanser such as car wash shampoo. Never use
solvents or other flammable liquids as a cleanser. Never direct the nozzle of a pressure washer
directly at the engine/motor or electrical parts.
 Clean the machine daily after use in or transport through a salty/briny environment. Be sure to
remove all the salt/brine, to prevent corrosion of the machine.
Monthly maintenance
 See maintenance chart.
 Grease the compact crane in accordance with the lubrication chart.
Scheduled service
 The first scheduled service must be performed after 2 weeks or 50 hours of operation.
 Thereafter the compact crane requires scheduled service annually or every 250 hours of
operation.
 It must also be inspected annually.
 It is recommended that you have the scheduled service and inspections performed by your
dealer or Hoeflon International B.V.
First use
 Perform the daily inspection (see section 6.1).
 Test the following aspects of the compact crane:
o Operation of emergency stop.
o All functions work properly.
o Safety provisions work properly.