User manual C4 – C6
64
Attach the loop of the winch cable to the winch head. The cable must
enter the hole in the plastic from the inside of the winch head, and
then the pin can go through the eye of the winch cable. Secure the
pin (see figure 84).
Use one hand to operate the joystick for the winch and use the other
hand to hold the winch cable and keep it under tension. Pull the
winch cable until it is under tension.
Use one hand to push the winch weight backwards so it is no longer
secured and use the other hand to operate the joystick for the winch.
See whether the winch weight can be lifted free of the support, and
lift the winch weight off of the support.
Figure: 84
To Next Page
Loading...