Chapter 6. Driving Procedures
This chapter contains procedures describing how to drive the C992 Holder tractor.
Warning: Failure to comply with the following guidelines could result in serious or fatal
injuries, and damage to the tractor.
Only the operators who are aware of the safety guidelines defined in Safety and Accident
Prevention chapter can operate the tractor.
Before you start your shift, you must complete the routine inspection of the tractor to ensure that
the tractor is in proper operational condition. To inspect the tractor, refer to Routine Inspection
before Every Shift chapter.
This chapter consists of the following:
Getting ready to drive 33
Starting engine 33
Inch pedal 34
Driving hydrostatic tractor 35
Fine speed adjustment dial 36
Engaging/disengaging parking brake 37
Engaging differential lock 39
Driving with trailer 40
To Next Page
Loading...