7. Task-Oriented Procedures
44
3. Check, if the engine oil pressure indicator in the instrument panel is lit while you are driving.
4. If step 3 is true:
1. Shut down the tractor.
2. See Troubleshooting chapter.
5. Check, if the parking brake indicator in the instrument panel is lit.
6. If step 5 is true:
1. Stop driving and turn the parking brake switch off.
2. Wait until the parking brake indicator in the instrument panel turns off, and the alarm stops.
Then, continue driving.
Caution: Traveling with the parking brake engaged will overheat engine oil, cause
premature wear, and possibly overheat the seals causing gear oil leaks. If you attempt to move
the tractor with the parking brake engaged, the alarm will sound.
Parking tractor
This procedure provides instructions on how to park the tractor.
To park the tractor:
1. Stop the tractor on level ground with no inclination.
Caution: The tractor may roll away if parked on a slope.
2. Bring the tractor to a complete stop.
a. Set the drive direction switch to neutral.
b. Set the drive program switch to 0.
c. Engage the parking brake. Follow Engaging/disengaging parking brake procedure.
3. Float the attachments completely (?).
4. Secure the tractor with wedges if wedges are available.
5. Turn off the engine and remove the ignition key from the ignition.
6. If you park the tractor for more than six hours, set the battery disconnect switch to off position.
Fueling
This procedure provides instructions on how to fuel the tractor.
To fuel the tractor:
Danger: Risk of fire
l Do not refuel near open flames, sparks, or hot engine parts.
l Do not smoke while refueling.
To Next Page
Loading...