9. Getting ready to work with attachments
76
When the floating position is switched on, a lifted implement falls quickly or slowly to the ground,
depending on the weight.
If you disregard these guidelines,
there is a possibility of severe or fatal injuries.
Procedure
1. Push button (26) on the foil keyboard. Floating position is switched on. The LED display in the
button (26) is lit, i.e. the attachment can swerve due to outer effects.
2. Deactivate the float position, push button
(26) again. LED display in button (25) goes out.
* Optional equipment
Operating yellow hydraulic connections with joystick
1. Press button (2) and press joystick (10) to the left or right and hold. The hydraulic function yellow* is
proportionally controlled.
2. Move joystick (10) back to middle position, hydraulic function stops.
Operating the white hydraulic connections*
3. Press button (2) and press joystick (10) to the front or back and hold. The hydraulic function white*
is proportionally controlled.
4. Move joystick (10) back to middle position, hydraulic function stops.
ADVICE
The yellow and white hydraulic connections* have no floating position.
* Optional equipment
Operating electro-hydraulic implement relief
Operating the electro-hydraulic implement relief*
ADVICE
It only makes sense to use the im-
plement function* for an implement weight above 200 kg.
To Next Page
Loading...