7. Task-Oriented Procedures
46
l Do not adjust the driver's seat while driving.
l Ensure that the seat locks after every adjustment.
Failure to comply may lead to loss of control over the tractor, which may result in serious or
fatal injuries.
To adjust the backrest inclination:
1. Sitting in the driver's seat, pull the backrest inclination lever upward and adjust the inclination
angle of the backrest using your back.
2. Release the backrest inclination lever and ensure that the backrest is secured in place.
Note: The backrest folds down if you pull up the backrest inclination lever when the seat is
unoccupied. To unfold it, simultaneously pull the backrest inclination lever upwards and lift
the backrest.
To switch on the horizontal suspension:
1. Unlock the horizontal suspension lever.
To adjust the horizontal position of the driver's seat:
1. Pull up the horizontal position adjustment bar and move the seat to the preferred horizontal
position.
2. Release the horizontal position adjustment bar and ensure that the seat locks into place.
To adjust the seat depth:
1. Pull up the right button on the seat adjustment panel at the front of the driver's seat.
To adjust the cushion inclination:
1. Pull up the left button on the seat adjustment panel at the front of the driver's seat.
To adjust the seat height:
Note: Adjust the seat height when the engine is running to avoid battery depletion.
1. Sitting in the driver’s seat, pull (where?) the seat height adjustment lever.
2. Release the lever when you find the right position and ensure that the seat locks into place.
To adjust the lumbar support:
1. Turn the lumbar support wheel until the most comfortable position is found.
To Next Page
Loading...