9. Getting ready to work with attachments
87
ADVICE
Switch off the flow dividers I and II and implement pump immediately after use so that the hydraulic oil
does not heat up unnecessarily.
ADVICE
The maximum pressure (set pressure) of the adjustable accessories hydraulic pump is 280 bar.
Attachments must be matched to this.
ADVICE
Avoid unnecessary oil heating by matching the available quantity of oil to the load (attachment).
ADVICE
Do not leave the flow divider or the implement pump switched on under any circumstances
• when the engine is running and no load is connected to the couplings
• when no load is operating
• when driving without oil consumption
* Optional equipment
ADVICE
The hydraulic system is damaged by excessive heating of the hydraulic oil.
To Next Page
Loading...