10. Special Options (Additional Functions)
90
To engage the dual drive system:
Caution: Bring the tractor to a complete stop for switching between high and low gear to
avoid damage to the tractor.
1. Ensure that the high/low cable is set to high gear.
2. Set the drive program switch to 2.
3. Drive the tractor for approximately 10-12 minutes in program 2.
4. Bring the tractor to a complete stop.
5. Set the drive program switch to 1 and proceed driving. The dual drive system will engage
automatically when ground speed exceeds 25 km/h (15.5 mph).
6. If the engine stalls while accelerating, follow Engaging emergency start-up for dual drive system
procedure.
To Next Page
Loading...