To Next Page
M
Miss Laura Oliver DVMAug 6, 2025
What to do if my Honda Electronics HE-6801 power can not be turned on?
- SsalazardavidAug 6, 2025
If your Honda Electronics Plotter won't turn on, it might be due to a low battery voltage (below 11V). Try recharging the battery. Also, check the power connector for poor contact; tighten it, and clean any rust or dust. If there's corrosion, consider replacing the connector. Additionally, ensure the power cable is correctly connected to the boat battery, paying attention to polarity. A cut wire inside the power cable could also be the issue, in which case, replace the cable. Finally, a blown fuse could be the cause.
General