2. HANDLING OF CABLES
2
WARNING
Be sure to use the specified power supply cable and fuse.
It cause to heating or firing.
Do not leave the power plug as it is while it is pulled out of the unit.
If the plug gets wet, it causes to heating or firing due to short circuited.
Be sure to wire in order to prevent the cables from interfering to operate boat.
If feet of crews or operating equipments are caught in cables, it causes to the
accident.
※Do not put the heavy objects on cables or do not bend cables excessively.
Do not disassemble or modify the cables.
It causes to heating, firing or electric shock.
Do not use the damaged cables.
It causes to firing or electric shock.
CAUTION
Do not pull the cable when you pull out the plug.
It causes to firing or electric shock because the cable is broken.
※When you pull out the plug, be sure to have it in your hand and pull it.
AUTION
Do not install at the place where rain or spray dashes directly. (It is not water-
proof.)
It causes to firing, human damage or electric shock due to increasing
temperature inside the unit.
Do not install at the place where it becomes hot.
It causes to firing, human damage or electric shock due to increasing
temperature inside the unit.
Be sure to ground.
If grounding is poor, it may receive interference from other equipments or it may
provide interference with other equipments.
To Next Page
Loading...