69
TO SET WATER TEMP. ALARM
Please refer to [HOW TO OPERATE MENU] ( page12 ) for operation of menu.
Please refer to [OPERATION OF PLOTTER]( page 46) for ARRIVAL/ANCHOR/OFF
COURSE alarm.
TO SET FISH ALARM
Select [5.ALARM][3.TEMP ALARM][1.ALARM
SET] on menu.
[1.ALARM SET] is established.
IN RANGE:
Alarm goes off when it is within two water
temperatures and water temp. readout flashes.
OUT RANGE:
Alarm goes off when it is out of two water
temperatures and water temp. readout flashes.
OFF: Water temp. alarm is canceled.
Select [5.ALARM][3.TEMP ALARM][2.TEMP
SET1], [3.TEMP SET2] on menu.
[Water Temp. Alarm]
Alarm goes off within or out of two water temperatures (TEMP SET 1, TEMP SET 2).
Water temp. sensor is required for this function.
1
2
3
Water Temp. Alarm
Select [5. ALARM][4. FISH ALARM][1.ALARM
SET] on menu.
Establish[1.ALARM SET].
S:Sensitivity increases to catch the response
from small fish school. (Also catch the
response from large fish school.)
L:To catch the response from large fish
school only.
OFF :Fish alarm is canceled.
[Fish Alarm]
When the response to be supposed fish school is displayed, alarm goes off.
1
2
Fish Alarm
Note ) It may catch the response from other objects than fish depending on
conditions.
To Next Page
Loading...