9
HOW TO PUT THE BATTERIES
Loose two screws and take off the rear cover.
Put the batteries in correct polarity.
Do not fasten screws strongly.
[CAUTION ON BATTERIES]
If you fail to use the battery, it causes to
leakage of solution or explosion.
Please make sure to keep the followings:
Put the batteries in correct polarity.
Do not use the new battery and used battery
or different kinds of batteries together.
Battery can not be charged.
When remote is not used for a long time, take
out the batteries.
When the solution is leaked from battery, wipe
off the stained solution from case, and then
put new batteries in.
1
2
Screw
Battery
WARNING
Do not use leaked battery. (When using wireless remote)
When leaked liquid stains on body, it may cause to damage.
In case of staining, wash out with clean water immediately.
CAUTION
Keep at the place where it will not drop due to vibration ,etc. when it is not used.
It causes to accident like human damage.
HANDLING OF REMOTE
When you operate it, face the top of remote to infrared rays sensor of main unit and
press the key.
2 pcs. sum-3 batteries are required for operation in case of wireless remote.
To Next Page
Loading...