Chapter 1 – About the Printer
6 6824 Mobile Full Page Printer User Manual
About the Control Panel
The printer control panel includes function buttons and status indicators for
printer operations.
6824 Printer Control Panel
ALT PARK
READY
CLEAR
POWER
SLEEP
LOAD
FF
READY
FAULT TRACTOR
OFF
Control Panel Function Buttons and Indicators
Button or Indicator Description
POWER/SLEEP button Press to turn on the printer or wake it from Sleep mode.
Press and hold for 5 seconds to place printer in Sleep mode.
READY/CLEAR button Hold this button and then press POWER/SLEEP to turn the printer off.
When the printer is idling, toggles between ready and standby modes.
When the printer is printing, press to pause and then resume the print job.
ALT button Press to enable alternate functions for programming and setting up the printer.
PARK button Press to reverse feed paper up to 17.5 cm (7 in). Use this feature to remove paper from
the printer.
LOAD/FF button After you load paper, press once to feed paper into the print mechanism.
If paper is already fed into the print mechanism, press once to advance to the next form.
READY indicator On: Printer is ready to print.
Blinking: Printer is receiving data.
Blinking slowly (once every 10 seconds): Printer is in Sleep mode.
Off: Printer is not ready to print, or current print job is paused.
FAULT indicator On: No paper is loaded and printer is empty.
Blinking: Printer error.
Off: No error. Printer is operating normally.
TRACTOR indicator On: Paper is loaded.
Blinking: Printer is receiving data for a firmware upgrade.
Off: Paper is not loaded.